NikNikon
June 16th, 2006, 06:01 PM
They look good to me Antonio. I wish I could get results like this with my 50mm 1.8, but then I've only tried on bands in small clubs, you had a few more stage lights to work with it looks like to me.
wallpaper Tattoo. heart and locket
EndlessWait
07-31 05:02 PM
This is just a letter sized paper. No pictures. Some people accept it. Some don't. Even in Florida. It didn't use to have a signature. But I guess now it does. Last time I asked them and they said it is valid and should be accepted anywhere in FL. But, try renting a car with it.
Its worse if you have to travel out of state, and rent a car. I had to travel on work and it was horrible. Every time you use your credit card they ask for photo ID.
There is another thing called ID card, different then license.
Its worse if you have to travel out of state, and rent a car. I had to travel on work and it was horrible. Every time you use your credit card they ask for photo ID.
There is another thing called ID card, different then license.
Radhika
10-01 01:46 PM
I have similar question. My visa on the passport has expired in Dec 2005. But we have valid h1 extention approval. what I have to select for the question "Are you applying for same visa class that expired in the last 12 months?"
'yes' or 'No ' for this question.
If I select 'no' it is not showing any appointments dates :confused:
'yes' or 'No ' for this question.
If I select 'no' it is not showing any appointments dates :confused:
2011 Heart Locket Tattoo
rbms
06-21 06:12 PM
I would suggest that before you take more interest in her case, first consult with her husband and make sure it is OK with him ;) ;) You know what I mean, right?:D
Man!!!, This is not in good taste. How do you know he did not consult her husband?
Man!!!, This is not in good taste. How do you know he did not consult her husband?
more...
Hermione
09-25 12:49 PM
Has your namecheck cleared? Mine took 18 months to clear. I am current, too, but no movement on I-485. I am thinking if there is no news by 10/15, I am going to start calling around.
smuggymba
10-05 11:00 AM
^^
they did that in 1996 and all this EB3 backlog is a result of that Z visa.Mnay of them have GC now.
Do you guys know if there is any restrictions on which employer to work for on Z visa and whether there are any travel restrictions?
they did that in 1996 and all this EB3 backlog is a result of that Z visa.Mnay of them have GC now.
Do you guys know if there is any restrictions on which employer to work for on Z visa and whether there are any travel restrictions?
more...
saratswain
11-05 04:08 PM
Hi, I had a similar case and I could port it. My case was
EB3 -> 06/2004
EB2 -> 08/2006
(Same employer, Texas center)
Last year in August when EB2 PD for 2004 was current my attorney sent a letter to USCIS. She mentioned that we can only send the letter when EB2--6/2004 is current. I inquired about the letter with USCIS few times but to no avail. This year when the PD becomes current I opened an SR on Aug-18th,2009 and the case got approved on Sept-1st.
I have an approved EB3 I140 ( PD 10/2002 ) and an approved EB2 I140 ( PD 04/2007 ) but my attorney has been having trouble getting the EB33 priority date on to EB2. My EB3 petition is with Texas Service Center. Both of my petitions are from same employer.
Has anyone had any success with Texas Service Center for this kind of request recently?
EB3 -> 06/2004
EB2 -> 08/2006
(Same employer, Texas center)
Last year in August when EB2 PD for 2004 was current my attorney sent a letter to USCIS. She mentioned that we can only send the letter when EB2--6/2004 is current. I inquired about the letter with USCIS few times but to no avail. This year when the PD becomes current I opened an SR on Aug-18th,2009 and the case got approved on Sept-1st.
I have an approved EB3 I140 ( PD 10/2002 ) and an approved EB2 I140 ( PD 04/2007 ) but my attorney has been having trouble getting the EB33 priority date on to EB2. My EB3 petition is with Texas Service Center. Both of my petitions are from same employer.
Has anyone had any success with Texas Service Center for this kind of request recently?
2010 Love Heart Locket Tattoos - Page 2 | Love Heart Locket Tattoos - Page 3 | Love Heart Locket Tattoos
Tantra
07-13 11:40 AM
Please post a message here to help encourage more guests of join in.
more...
Vlora
10-25 05:27 PM
It is hard to say. I am in the same situation as you (filed concurrently by June 21). I believe it is not worth giving them an extra $1000, and for what. You already have filed your I-485. What is the downside?
hair Att 4 Heart Locket Tattoo
sweet_jungle
01-10 06:17 PM
What do you mean by
"Can an attorney force me to file AC-21 even if i dont want to?"
Are you asking if the attorney would file the change of employment letter?
Please clarify your question
What I am trying to say is if the attorney prefers Ac-21 filing without waiting for RFE, while I may want to wait for RFE if i am sure sponsoring employer wont withdraw 140, whose word will prevail?
"Can an attorney force me to file AC-21 even if i dont want to?"
Are you asking if the attorney would file the change of employment letter?
Please clarify your question
What I am trying to say is if the attorney prefers Ac-21 filing without waiting for RFE, while I may want to wait for RFE if i am sure sponsoring employer wont withdraw 140, whose word will prevail?
more...
sarika
07-26 02:13 PM
I got my receipt numbers for I 485,I131 and I 765.
i got them by calling USCIS yesterday.
Mailed on:June 28th
Received date:June 29th at NSC
Notice date:July 23rd.
i got them by calling USCIS yesterday.
Mailed on:June 28th
Received date:June 29th at NSC
Notice date:July 23rd.
hot Tattoos? locket over heart
bombaysardar
07-17 10:22 PM
If you look at the rules closely on the website, pregnant women are exempted from taking shots. The medical tests should not be a problem.
more...
house Going to get a heart locket
shruthii_1210@yahoo.com
09-30 12:37 PM
1) If the employer revokes i140 before 180 days then what happens ,, is there any way to continue 485 ?
3) 1 1/2 yrs is the current H1-B status
Thanks
Karthik
3) 1 1/2 yrs is the current H1-B status
Thanks
Karthik
tattoo Heart Locket Tattoo
ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
more...
pictures Heart Locket Temporary Tattoo
pappu
03-14 03:12 PM
could someone volunteer on this thread to set up a call and inform everyone?
dresses Made with the Heart Locket
sweet_jungle
09-05 12:39 AM
I am July 2 filer. My EAD and AP was filed later in August. I got my EAD and AP receipts but I am yet to get I-485 receipt. Has this happened to anybody else? Is it possible to get 485 case number from the EAD or AP case numbers?
more...
makeup Heart Locket Tattoo Bilder 43
Madhuri
03-19 02:17 PM
Your signature says I 140 was approved, when was it approved and does that mean the USCIS website never updated the status of your I 140?
or was it showing I140 approved before and now it's showing pending?
No, I140 is not denied, its pending as per USCIS website. However, reason for I485 denial is that I140 is denied. Is this something to do with the RFE on I140? I dont see any logic in this...
or was it showing I140 approved before and now it's showing pending?
No, I140 is not denied, its pending as per USCIS website. However, reason for I485 denial is that I140 is denied. Is this something to do with the RFE on I140? I dont see any logic in this...
girlfriend DOUBLE HEART LOCKET TATTOO T-
Munna Bhai
01-18 01:08 PM
and trust me they will find one....
BTW - Canadian Dollar is doing better that USD...!!!!
If they can find some reason to deny that's fine.In that case they will find another reason to deny "GC approved" cases too!! Let's not be so negative about everything.
BTW - Canadian Dollar is doing better that USD...!!!!
If they can find some reason to deny that's fine.In that case they will find another reason to deny "GC approved" cases too!! Let's not be so negative about everything.
hairstyles art, locket, heart, Notes
garybanz
10-23 06:17 PM
I'll be in a conference in SFO and can't make it to diwali mela myself, but I'll like to sponsor an Immigration Voice TX t-shirt to who ever donates maximum time to the IV booth*.
I'll let Needhelp decide who the winner is.
* Restrictions apply, core team not eligible
I'll let Needhelp decide who the winner is.
* Restrictions apply, core team not eligible
GCBoy786
09-13 03:57 PM
I received my receipts today... Most of your's might be on the way too...
s416504
08-30 10:58 AM
??
Any one knows , How is my GREEN Light turned to RED ?? Ways to turn back green
Any one knows , How is my GREEN Light turned to RED ?? Ways to turn back green